Backup and Recovery, Dallas-Fort Worth

How to Check Whether Your Medical Office’s Backups Can Actually Be Restored

“Backup successful” only means a job finished. Here’s how to find out if you can really get your information back.

Quick Answer
Run a small restore test. A success message doesn’t prove the right files were included, that your applications will work, or that recovery will be fast enough. HHS says test restorations should be periodically conducted for exactly that reason. Start with one file, time it, check it, write it down, then repeat on a schedule. It takes 6 steps, and you don’t need to be a backup expert.

Your IT company says the backups are running. But if the server died on a Monday morning, could you actually get everything back, and how long would it take? That’s a fair question when your office runs on patient records, scanned documents, scheduling, and billing.

Here’s a simple way to find out. You coordinate and check the results. Someone authorized to manage the system does the actual restore.

Before You Start

Gather these first:

  • Contacts for your IT provider and for your EHR vendor’s support team
  • Your backup details: what’s covered, how often it runs, and how far back you can go
  • A spot to track results, like an Excel sheet, with no patient names in it
  • A safe test location that IT sets up so nothing live gets overwritten
  • A staff member who can tell whether the restored information looks right
  • A test window, with someone who can stop the test if anything odd happens
One rule: don’t send passwords, encryption keys, or patient records through regular email to set this up.

The 6-Step Restore Test

1

Write Down What You Can’t Work Without

Think about how work gets done, not about servers. Make a simple sheet with these columns:

System or data | What staff do with it | Responsible vendor | Backup coverage | Last restore test | Open questions

For each item, ask, “If this disappeared, what couldn’t we do?” Get specific, like “pull up scanned referrals.” And don’t forget what lives outside your EHR: scanned documents, workstation folders, billing files, and email. Backing up one application doesn’t mean everything is covered.

2

Find Out Who’s Actually Responsible

Send your list to your IT provider and your software vendors, and ask them to answer in writing: What do you back up, and what don’t you? How often, and how far back can we go? Who can request a restore? Can you restore one file or a whole system? Does a restore cost extra?

If your EHR is hosted, ask the EHR vendor how its recovery works and what testing evidence it has. Your local IT company may have no power over the vendor’s servers. Anything nobody can answer, mark “Unconfirmed” instead of guessing what “cloud hosted” includes. And if a vendor handles patient data, make sure a signed agreement is in place, which we cover in our BAA guide.

3

Decide How Fast and How Current Recovery Needs to Be

Get practice leadership to agree on two numbers. First, how long can this workflow be down? Second, how much recent work could you afford to redo? For example, a practice might say a certain administrative folder should be back within four hours, with no more than a day of changes missing. That’s just an illustration, not a recommended limit for patient records.

Set separate targets for your critical systems, and ask your providers whether they can meet them. A restore can work and still take too long. Our article on downtime costs per hour can help you see what slow recovery really costs.

4

Start With One Small File

Don’t start with a whole server. Pick a nonpatient document with known contents from a folder you’ve confirmed is backed up. Write down the folder and filename, the backup date you want, what the file should contain, and who will check it.

Ask IT to restore it to a separate, access-controlled spot, never on top of the original. You don’t need to delete the original to prove the backup works. For bigger tests later, IT should use an isolated environment so a restored system can’t send appointment reminders, submit claims, or transmit prescriptions by accident.

Backup console menus differ by product and version, so have the technician follow the vendor’s current instructions for restoring to an alternate location. Nobody should guess at an “overwrite” or “restore in place” option. And remember, one nonpatient sample only proves that one recovery path. It doesn’t prove your clinical databases are recoverable.

5

Time It, Then Check It

Have the technician note three times:

Restore requested | Technical restore completed | Staff check completed

Also note which recovery point they used and anything that slowed things down, like approvals, missing credentials, or waiting on a vendor. Remember that how old the backup is and how long the restore took are two different questions. A fast restore from an old backup can still leave a lot of work missing.

Then your staff reviewer opens the restored file in its normal application. Is it the right content? Is every page there and readable? Is it the date you expected? For an application or database, IT or the vendor should confirm it starts and that a few known test records show up. If anything is missing or damaged, that’s a finding, not a pass. Ask the technician for a job report, and keep patient details out of your tracking sheet.

6

Write It Down and Schedule the Next One

Add one dated entry per test: the system, the recovery point, the three times, who checked it, what worked, what didn’t, and an owner and due date for every fix. Attach the job report, then make sure IT deletes the temporary restored copies. That record is your proof for leadership, an auditor, or an insurer, and it fits what HHS describes for contingency planning under 45 CFR 164.308(a)(7), which includes data backup, disaster recovery, and periodic testing.

Fix the gaps, then test again, working up from a single file to a folder, then an application, then a full system. A reasonable starting rhythm is a sample file restore every quarter and a bigger restore at least once a year, plus a fresh test after any major change like a new EHR, server, or backup product. That’s a planning suggestion, not a legal requirement, so adjust it to fit your practice.

One more tip from HHS: some ransomware variants delete or disrupt online backups, so it’s worth considering offline copies that your network can’t reach.

What a Test Usually Turns Up

✕  The EHR is protected, but scanned documents and workstation folders aren’t
✕  Backups sit on the same network as everything else, so ransomware could reach them too
✕  Only one person knows how to request a restore
✕  The restore works, but takes far longer than anyone expected

When to Call in Help

Bring in your IT provider if you can’t list every system that holds patient information, if a backup has never been restored, if a hosted vendor can’t show you its recovery process, or if a test comes back with missing data. Any restore that touches a live system or a full application should be handled by someone authorized to manage it, not by office staff.

If you think an attack is happening right now, stop testing. Restore tests are for calm, planned windows. Preserve evidence and call your IT provider and attorney first. HHS treats ransomware on your systems as a security incident that can also be a presumed breach, which we walk through in our HIPAA data breach article.

Why Medical Practices Choose Silver Storm Solutions

Extensive experience serving medical offices HIPAA compliance expertise
Cybersecurity-first approach Proactive managed IT services

We run and document restore tests for our clients, from a single file to a full application recovery, so you can show what was tested, how long it took, and what got fixed. Learn more about our data backup and disaster recovery services, our HIPAA compliance services, and our IT support for OB/GYN practices.

Frequently Asked Questions

What’s the difference between a backup and a restore test?

A backup is a stored copy of your information. A restore test proves you can get that copy back in a usable form, fast enough for your practice. A success message from the backup software only confirms the first part.

Is a restore test required by HIPAA?

The Security Rule requires a data backup plan as part of a contingency plan, and HHS guidance says test restorations should be periodically conducted to verify backed up data. How that applies to your practice is a question for your compliance advisor or attorney.

Can we test with real patient records?

Start with a nonpatient sample so no patient information is exposed. If IT later restores patient data, it should go to a separate, access-controlled location, be protected like any other patient information, and the temporary copies should be deleted afterward.

If our EHR is cloud hosted, do we still need to worry about backups?

Yes. The vendor covers its own platform, but your scanned documents, workstation folders, shared files, and email may live somewhere else. Ask the vendor in writing how recovery works and what evidence it can show you, and cover everything else in your own backups.

Free Resource

Not sure where your practice stands? Try our free HIPAA assessment guide, a 48-point technical safeguards checklist that takes about 10 minutes.

Try Our Free HIPAA Assessment Guide

Could Your Practice Get Its Information Back Tomorrow?

Silver Storm Solutions can plan, run, and document a restore test for your practice, and fix whatever it turns up.

Get a Free Performance Assessment

Related resources:
How Much Does Downtime Cost a Medical Practice Per Hour? ,
What Happens If My Medical Practice Has a HIPAA Data Breach? ,
What Is a BAA and Do I Need One With My IT Company? ,
The Proposed HIPAA Security Rule Update

Post tags: #HIPAA #databackup #disasterrecovery #medicalpractice #DFW #healthcareIT

About the Author

ZOITO.

zrichardson@silverstormsolutions.com

Expertise in cybersecurity and helps businesses implement robust security strategies.